To add a tag to a device or to a group, the 'Add. Protocol Tag' command is used.
Because of a trap is a broadcast request, a filter is configured in a tag (data of what traps/devices will be written to the tag).
Tag parameters in the Protocol settings section define filtration (what traps from received ones must be written to the tag):
•Generic – a filter by Generic Type (coldStart, warmStart, linkUp, linkDown and etc.). Specified only for SNMP Trap 1, for versions 2 and 3 - leave the field blank. The field is specified in the standard OID format (for example, coldStart - .1.3.6.1.6.3.1.1.5.1);
•OID Enterprise – a filter by OID Enterprise. Specified only for SNMP Trap 1;
•snmpTrapOID - a filter by type Trap (coldStart, warmStart, linkUp, linkDown). Specified only for SNMP Trap 1 and 2. The field is specified in the standard OID format (for example, coldStart - .1.3.6.1.6.3.1.1.5.1);
•OID – a filter by an OID value
•Source IP – a filter by an IP address of incoming traps
•OID value type – a filter by a type of incoming values